Steering column system is very important to a motorcycle because it leads you to the right route as you requested,but if the gap of steerning system is too tight or there is jamming, it will cause the turning improperly and cause danger,here we will list the essentials when you checking it.

1.Steering column clearance: 

Prop up the motorcycle with the main stand, raise the front wheel, and gently shake the front damper. If there is obvious looseness, you need to adjust until it is not loose(see the photo below)

2.Bearing: 

If the above adjustment(NO.1) still appears stuck, you need to check the bearing and replace it if needed.

Disassemble the steering column and check the bearing base and bearing itself to make sure there is no defects, wear, etc.

Honest Motor use the good quality of bearing and steering column system,if you have any problem,please write to us info@honestmotor.net ,we are here 7*24H for you.